ROTARY REBAR CUTTERS STRAIGHT SHANK

ROTARY REBAR CUTTERS STRAIGHT SHANK

RELTON



Rebar Cutter

Straight Shank (RB)

  • The answer to drilling through concrete-embedded rebar

  • No longer necessary to relocate holes to avoid rebar; just drill straight through!

  • Diameters 13/16" and smaller are a 1-piece cutter, and diameters 7/8" and larger are a 2-piece system. 


Easy As...

1.  When rebar is encountered while drilling, immediately stop and remove the bit from the hole.

RCB0064H_edited.jpg

2.  Mount a rotary rebar cutter in a standard 1/2" drill motor or SDS+ rotary hammer motor (on rotary-only setting), and drill through embedded rebar.

RCB0065H_edited.jpg

3.  Once rebar has been drilled through, remove the rebar cutter, and continue drilling using the masonry bit.

RCB0066H_edited.jpg
ALL REBAR CUTTERS ARE DESIGNED FOR ROTARY-ONLY OPERATION
RB.jpg
Rebar Cutter - Straight Shank (1-piece)
DIA. OVERALL LENGTH PART NUMBER LIST PRICE WT. (lbs) SUGGESTED RPM'S
3/8" 8" RB-6 $63.00 0.3 850-1200
3/8" 12" RB-6-12 83.00 0.3 850-1200
3/8" 18" RB-6-18 96.00 0.5 850-1200
7/16" 12" RB-7 76.00 0.5 850-1200
1/2" 12" RB-8 65.00 0.6 850-1200
1/2" 18" RB-8-18 98.00 1.0 850-1200
9/16" 12" RB-9 76.00 0.7 850-1200
9/16" 18" RB-9-18 104.00 1.1 850-1200
5/8" 12" RB-10 79.00 0.8 750-1000
5/8" 18" RB-10-18 106.00 1.3 750-1000
11/16" 12" RB-11 90.00 0.9 750-1000
3/4" 12" RB-12 91.00 1.1 600-850
3/4" 18" RB-12-18 116.00 1.6 600-850
3/4" 24" RB-12-24 134.00 1.8 600-850
13/16" 12" RB-13 99.00 1.1 600-850

 

RB -COM.jpg

Rebar Cutter - Straight Shank (2-piece)
DIA. OVERALL LENGTH PART NUMBER LIST PRICE WT. (lbs) SUGGESTED RPM'S
7/8" 12" RB-14 $127.00 0.9 600-850
1" 12" RB-16 132.00 1.1 500-750
1-1/8" 12" RB-18 156.00 1.2 500-750
1-1/4" 12" RB-20 163.00 1.3 450-600
1-3/8" 12" RB-22 166.00 1.4 450-600
1-1/2" 12" RB-24 182.00 1.6 350-500
1-5/8" 12" RB-26 221.00 1.7 350-500
1-3/4" 12" RB-28 229.00 1.8 350-500
2" 12" RB-32 264.00 2.5 350-500
2-1/2" 12" RB-40 285.00 3.1 350-500
At last, the answer to drilling through concrete-embedded rebar! No more broken or shattered hammer bits; now you can drill through the rebar and not have to relocate the hole to avoid the rebar! Used to cut holes through embedded steel reinforcing bar. It is used to prevent damage to the hammer bit, which occurs if the hammer bit is used after rebar is encountered. *(7/8 in. - 2-1/2 in.) This is a two-piece system, and comes with a shank to make a overall length of 12 in.; However, longer or shorter shanks are available.


We Also Recommend